Brochures
Explosion venting is the most widely accepted and utilized explosion protection strategy in use today. When properly applied, explosion venting will prevent the explosion from reaching potential maximum pressures of 100 psig, or higher.
FlamQuench II is designed for use in combination with Fike explosion vents. It extinguishes the flame from the vented explosion, not allowing it to exit the device, where it could ignite secondary explosions or endanger personnel.
|
Applications
|
Datasheets
Code: 103
Supplier: Fike
This document outlines the installation and maintenance Instructions, including diagrams, for Fike Explosion Vent Assemblies.
Code: BIINST - 3
Supplier: Fike
This document outlines the installation and maintenance instructions, including diagrams, for the Fike BI Burst Indicator.
Code: C3740
Supplier: Fike
Vmax is a single membrane, high performance explosion vent. This multi-domed vent has excellent service life, allows high operating pressures, is vacuum rated, and provides stable performance over a wide range of temperatures.
Code: C3741
Supplier: Fike
The CV type vent is a composite membrane, high performance explosion vent. CV vents are lightweight and specifically designed for dynamic operation during venting of explosions from industrial equipment.
Code: C3742
Supplier: Fike
The CV-SF type vent is a composite membrane, high performance explosion vent. CV-SF vents are lightweight and specifically designed for dynamic operation during venting of explosions from industrial equipment.
Code: C3743
Supplier: Fike
The CV-CF type vent is a composite membrane, high performance explosion vent. CV-CF vents are lightweight and specifically designed for dynamic operation during venting of explosions from industrial equipment.
Code: C3744
Supplier: Fike
The CV-I type vent is a composite membrane, high performance explosion vent specifically used for higher process temperatures. CV-I vents are lightweight and designed for dynamic operation during venting of explosions from industrial equipment.
Code: C3745
Supplier: Fike
The CV-S type vent is a composite membrane, high performance explosion vent. CV-S vents are lightweight and specifically designed for dynamic operation during venting of explosions from industrial equipment. This explosion vent provides superior service life for severe process pressure cycling and pulsating conditions.
Code: C3746
Supplier: Fike
The CV-H type vent is a composite membrane, high performance explosion vent. CV-H vents are lightweight and specifically designed for dynamic operation during venting of explosions from industrial equipment.
Code: C3747
Supplier: Fike
FlamQuench II is the second version of a flameless venting device produced by Fike Corporation. The first version tested by Dr. Ing. Bartknecht, was marketed exclusively in Europe beginning in 1992. The improved FlamQuench II offers a higher efficiency and provides solutions to applications that could not be effectively protected before.
Code: C3770
Supplier: Fike
The Fike external insulation kit can be added to explosion vent assemblies to provide thermal insulation. The kit consists of a 2" slotted styrofoam board, a perforated stainless steel cover, and spacers.
|