Brochures

 CO2 Fire Suppression System for Marine Applications

Carbon dioxide is an effective fire suppression agent applicable to a wide range of fire hazards. Carbon dioxide works quickly, with no residual clean-up associated with a system discharge which translates into minimal process interruption. Fike is your single source supplier. We provide all the components necessary for a high quality carbon dioxide fire suppression system.

 HFC-227ea Fire Suppression System For Marine Applications

Fike’s Marine HFC-227ea system utilizes the same high performance valve technology as our commercial HFC-227ea system. This allows for more flexibility when placing cylinders around the hazard. HFC-227ea is an effective fire suppression agent applicable to a wide range of fire hazards. It quickly suppresses fires, and is recognized by the U.S. EPA as a non-ozone-depleting agent that is safe for installation in occupied spaces.

Applications

 Marine / Offshore

Code: CO 001
Supplier: Fike
Fike’s Marine Carbon Dioxide Systems are designed to be used on offshore applications where single or two step manual actuation is required. The Fike Marine Carbon Dioxide System utilizes superior engineered products to accomplish system operation utilizing fewer components which lowers cost and increases system reliability.

 Marine HFC-227ea System

Code: FM 001
Supplier: Fike
For many shipboard applications a HFC-227ea system will provide safe and reliable fire protection for the hazard as well as personnel on board.Fike Marine HFC-227ea Systems are used for suppressing fires in specific hazards or equipment and in occupancies where an electrically nonconductive agent is essential or desirable, or where cleanup of other media presents a problem near by.

Datasheets

 FE 227 - Agent Storage Containers

Code: C.1.27.01
Supplier: fike
Fike Series N70 Clean Agent Containers are used in fire extinguishing systems to store the Clean Agent until a fire develops and the agent must be released. The Clean Agent is retained in the container by a valve assembly which contains a fast acting rupture disc.

 FE 227 - Engineered Nozzles

Code: C.1.28.01
Supplier: fike
The function of the Fike Engineered Discharge Nozzle, in a fire extinguishing system, is to distribute the Clean Agent in a uniform, predetermined pattern and concentration. The nozzles are designed to complete the discharge of Clean Agent in 10 seconds, or less, when installed within the design limitations of the Fike Design.

 FE 227 - Container Accessories

Code: C.1.29.01
Supplier: fike
Products described include Reload Kit, Pressure Switch and 3" Check Valve.

 FE 227 - Instructional Signs

Code: C.1.30.01
Supplier: Fike

Instructional signs must be supplied in order to provide a system in which the function of all devices is easy to understand.
Fike offers “Standard” signs to comply with United States Coast Guard requirements. Custom signs are available upon request.

 FE 227 - Pneumatic Siren

Code: C.1.31.01
Supplier: Fike
The pressure operated siren is used to warn personnel of a system discharge. The siren is operated with the carbon dioxide pressure from the system. The pressure spins the turbine and sounds the siren from the beginning of the discharge throughout most of the discharge time.

 FE 227 - Pneumatic Time

Code: C.1.32.01
Supplier: Fike
The pneumatic time delay delays the discharge of CO2 for a predetermined amount of time. This extra time allows personnel to get out of the discharge area. It also allows additional time for ventilation and equipment shutdown.

 FE 227 - Pneumatic Actuator

Code: C.1.33.01
Supplier: Fike
Pneumatic Actuators, P/N C70-233 and N70-233, allow manual actuation of a Fike HFC-227ea or CO2 System for industrial or marine applications. Actuator C70-233 is a singlestep actuator and N70-233 is a two step actuator that is housed in a weather proof enclosure.

 FE 227 - Container Mounting Hardware

Code: C.1.34.01
Supplier: Fike
The Cylinder Strap provides a means to securely fasten the HFC-227ea container to a structural bulkhead. The Cylinder Saddle is used in conjunction with the Cylinder Strap to stabilize the cylinder when it is mounted.

 FE 227 - Local Level Actuator

Code: C.1.35.01
Supplier: Fike
The Local Lever Actuator is used to provide a means of manually discharging the Carbon Dioxide system at the Master Valve location via a stainless steel cable system tied to the Manual Cable Pull Box. The Local Lever Actuator is also used to provide a means of manually discharging the Carbon Dioxide system at the Master Valve location.

 FE 227 - Check Valves

Code: C.1.36.01
Supplier: Fike
Check Valves are available for use in pneumatic actuation lines using piping or tubing to prevent back pressure from a Carbon Dioxide discharge from flowing to hazards where it isn’t intended to.

 FE 227 - Cable Junction Box

Code: C.1.37.01
Supplier: Fike
The Cable Junction Box Assembly allows manual activation of the Stop/Selector Valve and/or Local Lever Manual Actuator from two locations as allowed by CFR Title 46 Section 95.15-10. The inlet side has four 3/8” NPT connections, and the outlet side has a single 3/8” NPT connection.

 CO2 - Liquid Level Indicator

Code: d1047
Supplier: Fike
The Fike 70-1353 series Liquid Level Indicator is a simple manually operated device which provides a means to determine the Clean Agent liquid level in vertically mounted agent storage containers. Once the liquid level is determined, it can then be converted into pounds (kilograms) of Clean Agent present in the agent storage container.

 CO2 - FM-200 Clean Agent

Code: d1100
Supplier: Fike
FM-200 (HFC-227ea) fire suppression agent is the first environmentally acceptable replacement for Halon 1301. FM- 200 has a zero ozone depleting potential, a low global warming potential, and a short atmospheric lifetime. FM-200 can be used to protect a wide range of applications from sensitive electrical equipment to industrial applications using flammable liquids.

 CO2 - Pressure Trip

Code: d1122
Supplier: Fike
The Pressure Trip is used to release spring or weight activated devices to close doors and windows, open fuel dump valves, close fire dampers or close fuel supply valves. The pressure trip can be operated manually, by use of the pull ring; or pneumatically by the agent discharge pressure.

 CO2 - Marine CO2 System

Code: d1150
Supplier: Fike
The Fike Marine Carbon Dioxide Extinguishing System is designed to be used on offshore applications where single or two-step manual actuation is required. The Fike Marine CO2 system utilizes superior engineered products to accomplish system operation utilizing fewer components which lowers cost and increases system reliability.

 CO2 - Corner Pulley

Code: d1151
Supplier: Fike
The corner pulley is required on a carbon dioxide system whenever remote pull box cable requires a change in direction. Corner Pulleys are installed as part of the cable housing (pipe or conduit) and provides a 90° direction change with minimal loss of force and elimination of induced cable kinking.

 C02 - Latch Door Type Pull Box

Code: d1152
Supplier: Fike
The Latch Door Pull Box on a carbon dioxide system is used to provide mechanical operation of the Stop/Selector Valve and/or the Local Lever Actuator from a remote location.

 CO2 - Stop / Selector Valve

Code: d1155
Supplier: Fike
The Stop/Selector valve serves two functions: It provides the second step, Stop Valve function that helps to assure the safe release of CO2 into the protected hazard. As a Selector Valve, it directs the flow of CO2 into a specific hazard area when protecting multiple hazards with a common CO supply.

 CO2 - Agent Storage Containers

Code: d1166
Supplier: Fike
Fike Series N70 Clean Agent Containers are used in fire extinguishing systems to store the Clean Agent until a fire develops and the agent must be released. The Clean Agent is retained in the container by a valve assembly which contains a fast acting rupture disc.

 CO2 - Engineered Nozzles

Code: d1167
Supplier: fike
The function of the Fike Engineered Discharge Nozzle, in a fire extinguishing system, is to distribute the Clean Agent in a uniform, predetermined pattern and concentration. The nozzles are designed to complete the discharge of Clean Agent in 10 seconds, or less, when installed within the design limitations of the Fike Design.

 CO2 - Container Accessories

Code: d1168
Supplier: Fike
Products described include Reload Kit, Pressure Switch and 3" Check Valve.

 CO2 - Instructional Signs

Code: d1169
Supplier: Fike
Instructional signs must be supplied in order to provide a system in which the function of all devices is easy to understand. Fike offers “Standard” signs to comply with United States Coast Guard requirements. Custom signs are available upon request.

 CO2 - Pneumatic Siren

Code: d1170
Supplier: Fike
The pressure operated siren is used to warn personnel of a system discharge. The siren is operated with the carbon dioxide pressure from the system.The pressure spins the turbine and sounds the siren from the beginning of the discharge throughout most of the discharge time.

 CO2 - Pneumatic Time Delay

Code: d1171
Supplier: Fike
The pneumatic time delay delays the discharge of CO2 for a predetermined amount of time. This extra time allows personnel to get out of the discharge area. It also allows additional time for ventilation and equipment shutdown.

 CO2 - Pneumatic Actuator

Code: d1172
Supplier: Fike
Pneumatic Actuators, P/N C70-233 and N70-233, allow manual actuation of a Fike HFC-227ea or CO2 System for industrial or marine applications. Actuator C70-233 is a singlestep actuator and N70-233 is a two step actuator that is housed in a weather proof enclosure.

 CO2 - Container Mounting Hardware

Code: d1178
Supplier: Fike
The Cylinder Strap provides a means to securely fasten the HFC-227ea container to a structural bulkhead. The Cylinder Saddle is used in conjunction with the Cylinder Strap to stabilize the cylinder when it is mounted.

 CO2 - Local Level Actuator

Code: d1181
Supplier: Fike
The Local Lever Actuator is used to provide a means of manually discharging the Carbon Dioxide system at the Master Valve(s) location via a stainless steel cable system tied to the Manual Cable Pull Box(es). The Local Lever Actuator is also used to provide a means of manually discharging the Carbon Dioxide system at the Master Valve location.

 CO2 - Marine Instructional Signs

Code: d1182
Supplier: Fike
Instructional signs are provided to inform personnel of any potential hazards they face when operating certain devices or working within areas protected by CO2 systems. All signs are made of stainless steel and have black lettering.

 CO2 - Check Valves

Code: d1183
Supplier: Fike
Check Valves are available for use in pneumatic actuation lines using piping or tubing to prevent back pressure from a Carbon Dioxide discharge from flowing to hazards where it isn’t intended to.

 CO2 - Cable Junction Box

Code: d1184
Supplier: fike
The Cable Junction Box Assembly allows manual activation of the Stop/Selector Valve and/or Local Lever Manual Actuator from two locations as allowed by CFR Title 46 Section 95.15-10. The inlet side has four 3/8” NPT connections, and the outlet side has a single 3/8” NPT connection.

 CO2 - Selector Valves

Code: d1185
Supplier: fike
Selector Valves are used to direct the flow of carbon dioxide into one specific hazard of a multiple hazard system. All selector valves are equipped with an electric solenoid actuator.