Brochures


  • B9106 Explosion Protection

    Many industries in which combustible dusts or gases are handled risk the devastating effects of an explosion. The amount of heat liberated during an explosion creates extremely high pressures which can result in damaged process equipment, loss of production and serious injury to personnel. Leading insurance firms estimate the average direct costs of an explosion in the hundreds of thousands of dollars, with many unprotected explosions leveling plants, or even closing businesses.

  • B9100 Venting Product Guide

    Proven to be one of the most effective forms of passive explosion protection, explosion venting provides overpressure protection from potential deflagration hazards by providing a planned pathway for the expanding gases to escape.

  • B9113 FlexV_Suppression

    Explosion and fire damage can be costly--creating substantial losses in manufacturing downtime and causing extensive damage to valuable production equipment.Fike is uniquely qualified to engineer and supply complete protection against damage resulting from explosions and subsequent fires.

  • S1019 Flex_V_SS

    The exciting Flex-V by Fike is a high performance device designed to protect industrial process equipment against the damaging effects of dust and gas explosions. Unlike traditional venting, the Flex-V panel returns to its original position at the end of the venting process, restoring about 90% of the vent relief area.

Data Sheet


  • 06-308-1 EP Vents

    An explosion vent is a pressure relief device, designed to give an instantaneous opening at a predetermined pressure. Its purpose is to protect the equipment from excessive pressures caused by dust or gas deflagrations

  • X.1.09.01 Vmax

    Fike Corporation designs simple, reliable explosion protection solutions to meet your safety requirements. Fike’s high performance Vmax vent features a single membrane,multi-dome surface that provides the longest service life for harsh conditions such as pulsating or cycling, higher operating pressures, and stronger vacuum.

  • X.1.11.01 Sani-V

    Damage to industrial equipment subjected to explosions can be controlled through the use of explosion venting. Explosion venting as a concept introduces a “weak element” in the pressure envelope of the equipment, relieving the internal combustion pressure in case of an explosion.

  • X.1.12.01 Sani-VS

    Damage to industrial equipment subjected to explosions can be controlled through the use of explosion venting. Explosion venting as a concept introduces a “weak element” in the pressure envelope of the equipment, relieving the internal combustion pressure in case of an explosion.

  • X.1.13.01 EleQuench

    Fike Corporation designs simple, reliable explosion protection solutions to meet your safety requirements. Approximately half of grain dust explosions originate from a bucket elevator. Fike developed the EleQuench explosion vent with easy installation features for use on elevator legs. For indoor elevators where vent ducting is not desirable, affordable, or possible, Fike offers a flameless venting companion to the EleGuard™ vent. The EleQuench flameless venting device prevents the release of flame and product, typically relieved during an explosion. The EleQuench filter and EleGuard vent bolt directly onto the elevator

  • X.1.14.01 CV

    Fike designs simple, reliable explosion protection solutions to meet your safety requirements. Fike’s Composite Vent, or CV, is widely used and sets the industry standard for explosion vents. This flat vent layers stainless steel and FEP or PFA film to create a high performance explosion vent. The CV is an effective solution for static to light pressure cycling and light vacuum conditions.

  • X.1.15.01 CV-SF

    Fike Corporation designs simple, reliable explosion protection solutions to meet your safety requirements. The CV-SF vent is constructed with a support frame with back-up bars in the vent frame assembly to provide extra support for higher vacuum conditions while maintaining a flat profile. The Fike CV-SF vent is a composite membrane, high performance explosion vent that provides a superior service life for static to light pressure cycling conditions. Typical applications include separation, drying, storage, conveyance, and processing operations.

  • X.1.17.01 CV-I

    Fike designs simple, reliable explosion protection solutions to meet your safety requirements. The Fike CV-I vent is a composite membrane, high performance explosion vent that provides service life for static to light pressure cycling conditions. The CV-I vent is constructed with insulation to accommodate higher temperature processes, up to 800°F/425°C. Typical applications include separation, drying, storage, conveyance, and processing operations.

  • X.1.18.01 CV-S

    Fike designs simple, reliable explosion protection solutions to meet your safety requirements. The Fike CV-S explosion vent is especially designed to provide non-fragmenting opening when protecting industrial processing equipment. Round CV-S vents operate up to full vacuum levels depending on vent size. Rectangular CV-S vents are designed for use in applications where the operating pressure approaches the burst pressure, or where moderate vacuum pressure may exist.

  • X.1.19.01 CV-H

    Fike designs simple, reliable explosion protection solutions to meet your safety requirements. The Fike CV-H vent is a composite membrane, high performance explosion vent for sanitary processes where no vacuum conditions exist. Typical applications include separation, drying, storage, conveyance, and processing operations.

  • X.1.21.01 EleGuard

    Fike Corporation designs simple, reliable explosion protection solutions to meet your safety requirements. Fike’s EleGuard is a single element, explosion venting device specifically designed for use in protecting bucket elevators from damaging explosions. This cost-effective explosion vent is also easy to install because of its integrated frame, requiring only six bolts. In addition, the EleGuard can be installed with Fike’s EleQuench™ flame filter to provide safe venting options for indoor applications. EleGuard explosion vents used in combination with EleQuench flame filters should include a rupture indicator (RI) to provide supervision and notification when the vent ruptures. The EleGuard can be factory-equipped with an RI, featuring a 3 meter cable with flying leads, for connection to monitoring equipment. Extension cables of 10 and 25 meters are also available.

  • X.1.39.01 Sani-VA_Sani-VSA

    Fike’s unique, high performance Sani-VA and Sani-VSA explosion vents for demanding “clean” applications are designed to: • Simplify handling and to minimize the risk for damage during installation by using lightweight materials • Meet or exceed the requirements per European norms EN 14797 and EN 14491, and the NFPA 68 standard • Meet or exceed the specific needs for Clean In Place/Steam In Place production environments The Sani-VA and Sani-VSA explosion vents are the only explosion venting devices available to the industry that are in full compliance with the requirements of both the 3-A and EHEDG hygienic/sanitary industry standards.

  • X.16.01. CV-CF

    Fike designs simple, reliable explosion protection solutions to meet your safety requirements. The CV-CF vent is constructed with a foam filling in its core to accommodate more aggresive pressure cycles and high vibrations. Typical applications include separation, drying, storage, conveyance, and processing operations.

Approvals


  • 3A_PTFE Gasket Material

    Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX CV S Vent

    EC-Type Examination Certificate Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX CV Vent

    EC-Type Examination Certificate Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX CV-CF Vent

    EC-Type Examination Certificate Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX HI Vents

    EC Type Examination Certificate Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX Rupture Indicators

    EC Type Examination Certificate Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX Sani V ElevEx

    EC Type Examination Certificate

  • ATEX SaniVS German

    Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX Semicircular CV German

    Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • ATEX Vent SuppIso Det

    Production Quality Assurance Notification

  • DIN GOST FE

    Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • FM Approval Guide

    Approval Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • GGTN FE

    Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.

  • IECEx Burst Indicator

    IECEx Certificate of Conformity Fike explosion vents are EN14797, NFPA 68 Compliant and ATEX Certified.