• ProInert®2 Gaseous Suppression System

    The Inert Gas System so safe it even protects your budget.

Data Sheet

  • C.2.28.01 ProInert® Valve Assembly

    The ProInert Discharge Valve Assembly is a self-regulating valve that allows the extinguishing agent to be released from the cylinder at a constant pressure. Because pipe pressure and nozzle flow rates remain constant throughout the discharge,  small diameter piping can be used throughout the protected space, and the need for installing overpressure relief vents in the room is minimised.

  • C.2.29.01 ProInert® Discharge Hose Kit

    The Discharge Hose Kit, IG71-003, is used to provide a flexible connection between the ProInert cylinder valve and the discharge piping or the distribution manifold.

  • C.2.30.01 ProInert® Discharge Nozzles

    The function of the discharge nozzle in a fire extinguishing system, is to distribute the agent in a uniform, predetermined pattern and concentration.

  • C.2.32.01 ProInert® Discharge Manifolds

    ProInert manifolds are offered in 2, 3, 4 and 5 cylinder configurations. For systems that require more than 5 cylinders, manifolds must be interconnected into a common feed pipe.

  • C.2.41.01 ProInert® Selector Valve Assembly

    Fike offers several selector valves for use with the ProInert Fire Extinguishing System. The Selector Valve allows a single agent supply to be utilized for protection of multiple hazards, reducing the total number of cylinders required.

  • C.2.47.01 ProInert® Actuator Assembly

    Each Fike ProInert Cylinder is equipped with a latching Actuator Assembly that actuates the cylinder valve. The actuator includes a flexible hose that is used to connect it to the next actuator assembly on multiple cylinder systems.

  • C.2.48.01 ProInert® Pipe & Fittings

    Pipe and fittings used in Clean Agent System piping network must conform to the requirements as outlined in NFPA 2001 and ISO 14520, latest editions.

  • C.2.49.01 ProInert® Dishcarge Pressure Switch

    Fike’s Discharge Pressure Switch Assembly (DPS) is used to provide a latching electrical input to the control panel to confirm a system discharge/actuation.

  • C.2.50.01 ProInert® Actuation Packages

    Each ProInert cylinder or group of cylinders being actuated simultaneously (up to 60 cylinders) requires a nitrogen actuator for valve activation.

  • C.2.51.01 ProInert® Mounting Hardware

    All ProInert cylinders must be adequately mounted and supported to suitable mounting surface. Fike offers a racking system for multi-row configurations to secure the cylinders. The racking consists of the hardware necessary for assembly, including front support, rear support and clamp rods. The various racking options available provide the installer with multiple options for cylinder arrangement. Cylinders may be mounted in Single-Row, Double-Row or Triple-Row configurations.

  • ProInert® IG-100 Agent

    IG-100 is a colorless, odorless, electrically non-conductive gas with a density approximately the same as air. (see Physical Properties for additional information).

  • C.2.56.01 ProInert® IG-100 Agent Storage Assembly

    Fike ProInert Cylinders are offered in an 80 Liter size and filled to a pressure of 200 or 300 bar. The cylinders may be utilized in single or multiple cylinder applications as needed and linked together through a common discharge manifold.

  • C.2.59.01 ProInert® IG-100 Pressure Gauge Switch

    Each Fike ProInert Cylinder is equipped with a Pressure Gauge and Switch Assembly to indicate a visual pressure indication at the cylinder, as well as continuous cylinder pressure monitoring at the control panel.

  • C.2.62.01 ProInert® IG-100 Instructional Signs

    Caution/Advisory Signs are provided to comply with ISO/EN and/or NFPA 2001 requirements, and to provide the necessary information to personnel in the area.


  • IG-100

    IG-100 Safety Data Sheet