You have been re-directed to our Australian Website, the product range may differ for your region so please contact our Singapore office for specific products, enquiries@fire-protection.com.sg
The SEVO Flex Multipoint Pre-Engineered Automatic Clean Agent Fire Suppression System utilises unique flexible detection tubing attached to the top of the cylinder valve. This tubing is pressurized with Nitrogen to 240PSIG (16.5 bar) to maintain cylinder valve closure.
The Flex discharge adaptor Model P00008 connects the cylinder and the pipe run. It allows removal of the cylinder without uninstalling any additional components.
The electric detection system consists of a control panel and a linear heat detection line.
The SEVO Flex™ Multipoint Pre-engineered Automatic Clean Agent Fire Suppression System utilises unique flexible detection tubing attached to the top of the cylinder valve. This tubing is pressurised with Nitrogen to 240 PSIG (16.5 bar) maintaining cylinder valve closure.
Designed with: 3M™ Novec™ 1230 Fire Protection Fluid
The pneumatic detection tee Model SF-TO6 is used for the distribution of the detection tubing.
The pneumatic detection tubing is temperature sensitive, and acts as a continuous linear thermal detector that ruptures at either 2480F (1200C), or 3560F (1800C) depending on the hazard area being protected.
The multiple use manual actuator Model MA4420B allows manual actuation of the Flex pneumatic device. Additionally, a Discharge Pressure Switch can be utilized to send an electrical signal to indicate discharge or to perform equipment shut down.